Fiber Optic Tool Kit

Tool Kit

Fiber Optic Tool Kit Features

  • Use with Pre-Polished Fiber Optic Connectors
  • Cut down on overall fiber installation cost by reducing termination time
  • Field assembly, No polishing required
  • Fast and easy to terminate
  • Compact waterproof protection bag
  • Encourages safe handling of fiber off-cuts

Fiber Optic Tool Kit Description

The FTTH fiber cold-connected construction kit is a simple and convenient integration solution for Fttx fiber-to-the-home quick-connect construction, such as stripping, fiber cutting, cleaning and testing. It is economical and practical, and is an ideal tool for construction operators.

Fiber Optic Tool Kit Data Sheet

Tool NameQuantity Usage
FC-6S fiber cleaver1cutting 0.9/0.25mm fiber
Fiber cleaver box 1better protection cutting knife
 high-end optical power meter 1set test fiber link attenuation value
FC/SC connector for optical power meter2square ends, round pigtails
charger 1charge the optical power meter
5 km red light pen1set of fiber and detection fiber breakpoint
Leather cable stripping device (cutting steel wire)1peeling cable cable sheath cover
fiber stripper 1stripping fiber coating / tight
Miller pliers1Proper placement of instruments and tools
Tool kit L71
clean paper
fixed length stripping device (quick connection) 1auxiliary fixed length stripping coating
rail strip (quick connection)1auxiliary fixed length cutting fiber
red light pencil case
tool adjustment 6 angles in size
alcohol bottles, etc

Power meter

User-self calibration function.
Comfortable LCD display and optional backlight LCD display supports night operation.
Power measurements in dB or mw and insertion loss
Low battery consumption, more than 240 hours continual operation time for three 1.5V alkaline  batteries
Optional 10 minutes Auto-off function. 

Visual fault locator

which use 650nm semiconductor laser as a light emitting device, through the constant current drive, transmit the red light which power is stable. After connecting with optical interface, the red light can enter into the multimode and single mode fiber, achieve detecting function of optical fiber fault. It is an indispensable tool for fiber-optic construction, fiber-optic network maintenance, optical device production and research.

Fiber cutter

The CFS-2 fiber stripper is used to peel 250um coating of 125um fiber.
The 1.98mm open pore at the top uses to peel 0.9mm tube of fiber optic pigtail

Fiber stripper

Applies to 2mm, 3mm indoor cable sheath peeling.
The cutting depth can be adjusted, to ensure not to hurt the fiber.
Light weight, small volume, easy to operate.

Fiber cleaver

  • Compact body & Light weight •Application up to 12-fiber cleaving •36000 fibers blade life(3 height *12 positions)
  • Has superior blade height and rotational adjustment , can be operated with  minimal steps. 

Fixed length device

  1. peel the fiber sheath first.
  2. unfold the guide bar and put the stripped naked fiber into the slot of the stripper. The guide bar is closed, and the finger is pressed slightly to guide the blade position of the guide bar to pull out the naked fiber, and then the coating layer is stripped.
  3. when the guide bar is used, the stripping device is required to be flat and unfolded, and the stripped naked fiber is put into the guide bar, and then they are put into the cutter to cut.

Alcohol Bump Bottle

Precision design
Eliminate volatilization

Ask for Quote